tested power to brake light switch found no power to switch checked fuse in ipc fuse panel found fuse to be blown , replaced fuse and re checekd power in and out of brake light switch and shift interlock checked operation of brake lights all operating as designed inspected brake light bulbs and sockets no melting or damage found no chaffing of wires found both brake light bulbs to have dark discoloration so replaced both bulbs while apart removed third brake light led assembly inspected wiring no damage found road tested 10 miles vehicle operating as designed possible intermittent short somewhere in system or brake light switch system functioning as designed after fuse replacement
Christine B. gave our service a 5 star review on 5/2/2024
Verify customer complaint and vehicle's performance. Scan computer system for codes using a scanner & diagnostic analyzer. Check sensor operation. If codes are present in computer system record codes. Advise of any additional inspection services needed. Visually inspect engine performance parts for damage or excessive wear. Check and advise of any needed or recommended repairs. scanned for diagnostic trouble codes p0348 camshaft position sensor a circuit high bank 2 tested system found wiring damaged for cam shaft position sensor removed intake plenum and repaired wiring installed plenum and re checked for proper operation system operating as designed at this time
INTAKE MANIFOLD GASKET – Remove & Install – V6
repair wiring harness
found replacement windshield installed in vehicle rattle is coming from dash where connects to body at windshield was able to add piece of foam in gap was able to improve concern would need to remove dash to see what repair needs would be
Richard T. gave our service a 5 star review on 12/8/2023