2005 Nissan Altima
Mileage
43,927
Service Date
6/15/2021
Services Performed
- Remove and reinstall four wheels and rear brake drums to inspect brake condition. Inspect entire system for leaks. front brakes 10mm rear brakes 3-4 mm
- Check charging system for proper output to battery. Load test battery. Check wiring on electrical system and record findings. battery passed load test tested charging system system output 14.0 volts charging as designed at this time
- tested system found 2 codes stored in system p0725 engine speed input circuit ,p0335 crankshaft position sensor fault circuit A. vehicle has long crank condition tested system found crank position sensor to drop out at times sensor failing replaced camshaft position sensor and crank shaft position sensor and performed synchronization vehicle operating as designed at this time
- CRANKSHAFT POSITION SENSOR – Remove & Replace
- ALTERNATOR DRIVE BELT – Remove & Replace – In-Line4 – [Includes: Serpentine and V-Belt type Belt(s).]
- DISC ROTOR – Remove & Replace – Rear,Both – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
Angela J. gave our service a 5 star review on 6/15/2021